AEM Publications: Journals
Modelling the in-plane/out-of-plane interaction of brick and stone masonry structures using Applied Element Method
Abstract: This research focuses on the numerical modelling of the seismic behaviour of unreinforced masonry (URM) structures with interconnected in-plane (IP) loaded and out-of-plane (OOP) loaded walls. The mechanical behaviour of such wall assemblies is complex and...
Reliability of collapse simulation – Comparing finite and applied element method at different levels
Numerical prediction of progressive collapse of buildings due to extreme loading is still a challenging task. However, increased computational power makes it nowadays possible to analyze not only small-scale connections and mid-size building elements, but also full buildings with considerable height and complexity. The present paper compares the results of Finite Element Method (FEM) and Applied Element Method (AEM) simulations to experimental results when performing blast or earthquake analysis on those three scales. The aim is to highlight which level of physical detail and complexity is required to predict progressive collapse numerically, and which level of accuracy can be expected. For the full scale level, the progressive collapse of the Pyne Gould Corporation Building in Christchurch, New Zealand, was simulated and compared to the final collapse shape. It is shown that the FEM is able to predict the structural response of small scale models well, but fails to achieve realistic collapsed shapes in case of the large structure, whereas the AEM shows convincing results in all cases.
Research and Practice on Progressive Collapse and Robustness of Building Structures in the 21st Century
Extreme events (i.e. terrorist attacks, vehicle impacts, explosions, etc.) often cause local damage to building structures and pose a serious threat when one or more vertical load-bearing components fail, leading to the progressive collapse of the entire structure or a large part of it. Since the beginning of the 21st century there has been growing interest in the risks associated with extreme events, especially after the attacks on the Alfred P. Murrah Federal Building in Oklahoma in 1995 and on the World Trade Center in New York in 2001. The accent is now on achieving resilient buildings that can remain operational after such an event, especially when they form part of critical infrastructures, are occupied by a large number of people, or are open to the public. This paper presents an ambitious review that describes all the main advances that have taken place since the beginning of the 21st century in the field of progressive collapse and robustness of buildings.
Using the applied element method for modelling calcium silicate brick masonry subjected to in‐plane cyclic loading
he response of calcium silicate unreinforced masonry construction to horizontal cyclic loading has recently become the focus of experimental and numerical research, given its extensive use in...
Evaluation of the Seismic Retrofitting of an Unreinforced Masonry building using Numerical Modeling and Ambient Vibration Measurements
Ambient vibration measurements and 3-D nonlinear time-history numerical modeling are used to assess the retrofitting measures conducted in a 6-story unreinforced masonry building (URM) built in the end of the 19th century in Switzerland. Retrofitting measures were taken in order to improve the soundproofing and possibly the seismic performance of the building. Reinforced concrete (RC) footings were added under the walls and horizontal steel beams were added to link the walls together with a RC slab at each floor, though the wooden beams were left in place. Several ambient vibration recordings were performed before, during and after the retrofitting work in order to monitor the evolution of the dynamic behavior of the structure. Moreover, numerical models representing the state of the building before and after the retrofit work have been developed to perform nonlinear dynamic analyses using various ground motion records.
Simulation of the Dynamic Response of Steel Moment Frames following Sudden Column Loss. Experimental Calibration of the Numerical Model and Application
Significant research effort has been devoted in recent years to the evaluation of the capacity of steel frame structures to resist progressive collapse after sudden column loss. Due to the complex load-structure interaction and material behaviour, it can be very difficult to evaluate the ultimate capacity of structural components using current analytical methods. Therefore considerable research effort has been directed to experimental testing and sophisticated numerical simulations. Although sudden column loss is a dynamic process, most experimental studies on fullscale or scaled down specimens were performed under quasi-static loads. This paper presents the results of a study devoted to the evaluation of steel frame response following the loss of a column. Advanced numerical models are calibrated using experimental test results and dynamic increase factors are studied. Several full-scale structures are investigated for a sudden column loss scenario.
Establishing a Predictive Method for Blast Induced Masonry Debris Distribution Using Experimental and Numerical Methods
hen subjected to blast loading, fragments ejected by concrete or masonry structures present a number of potential hazards. Airborne fragments pose a high risk of injury and secondary damage, with the...
Seismic Performance Evaluation of Masonry Infilled Reinforced Concrete Buildings Utilizing Verified Masonry Properties in Applied Element Method
resent study aims on evaluating the seismic performances of existing Masonry Infilled Reinforced Concrete (MIRC) buildings commonly found in many South and Southeast Asian countries utilizing appropriate...
Applied Element Method Simulation of Experimental Failure Modes in RC Shear Walls
ith the continuous evolution of the numerical methods and the availability of advanced constitutive models, it became a common practice to use complex physical and geometrical nonlinear numerical analyses to...
Numerical Analysis on the Collapse RC Frame
his paper focuses on the collapse analysis of a planar RC frame. This research is based on an experimental study presented in the literature. The analyses are conducted using a dedicated software based on...